Floor Care

52% Hi Solids Polyurethane

FEATURES:

  1. Seals, Protects & Beautifies Concrete - Wood - Steel - Cement
  2. One Component System
  3. Tough Penetrating Treatment
  4. Protects Floors Subject To Rough Usage
  5. 52% Solids
  6. Coverage 400-600 sq ft

DESCRIPTION:

This polyurethane coating is a high solids formula with drying agents and solvents to give excellent results when used on concrete, wood, cement and other hard floors. This forms an effective barrier against chemical attacks and moisture penetrations. This finish is a complete treatment that absorbs to seal and finish floors in one step.

. This product will give a smooth, durable, high gloss finish. This product will not show overlaps so floors can be patched when necessary.

. Coverage is approximately 400 sq. ft. for the first coat, 600 sq. ft. for second coat. Approximate drying time at 60 degrees F. is 6-8 hours. Dry time will change depending on humidity and temperature

DIRECTIONS:

Clean the surface thoroughly with a good cleaner.

. Agitate the surface with a stiff brush.

. Allow the surface to dry thoroughly prior to applying the sealer.

. Apply with a paint roller, lamb's wool applicator, or brush.

. Special Notations : If very fine finish is desired on wood floors, we advise No., 3 steel wooling of the first coat. When completing the job, close the container tightly to prevent evaporation from taking place. Do not apply on a hot or muggy day.

Packaging:

Minimum order 1 gallon

4x1 single Gallons per case

6x1 single gallons per case

5 gallon pails

6 gallon pails

30 gallon drum

55 gallon drum

 
 

VST Chemical Corp. - P.O. Box 510 - Yulan, NY 12792 - Ph: 1-845-557-0596 - Email: chemicals@ecki.com