Floor Sealers

POWER SEAL POLYURETHANE COATING

FEATURES:

  1. Polyurethane
  2. Seals, Protects & Beautifies Concrete - Wood - Steel - Cement
  3. One Component System
  4. A Touch Penetrating Treatment for Floors
  5. Protect Floors Subject to Rough Usage
  6. Liquid Varnish

DESCRIPTION:

This polyurethane coating is a high solids formula with drying agents and solvents to give excellent results when used on concrete, wood cement, and other hard floors. This forms an effective barrier against chemical attacks and moisture penetration. This finish is a complete treatment that absorbs to seal and finish floors in one step.

. This product will give a smooth, durable, high gloss finish. This product will not show overlaps so floors can be patched when necessary.

DIRECTIONS:

  1. Clean Surface thoroughly with a good cleaner.
  2. Agitate the surface with a stiff brush.
  3. Allow the surface to dry thoroughly
  4. Apply with a paint roller, lamb's wool applicator or brush

. Special notations: If very fine finish is desired on wood floors, we advise No. 3 steel wooling of the first coat. When completing the job, close the container tightly to prevent evaporation from taking place. Do not apply on a hot or muggy day.

. Coverage is approximately 400 sq. ft. per gallon for first coat - 600 sq. ft for second coat. Allow 8 hours for each coat to dry.

Packaging:

4x1 single Gallons per case

6x1 single gallons per case

5 gallon pails

6 gallon pails

30 gallon drum

55 gallon drum

 
 

VST Chemical Corp. - P.O. Box 510 - Yulan, NY 12792 - Ph: 1-800-241-7428 - Email: chemicals@ecki.com