Janitorial

Acoustical Tile Restorer

FEATURES:

  1. Covers Discoloration
  2. Non-Flammable When Dry
  3. Dual Spray System
  4. Non-Chlorinated Solvents - No Hexane
  5. Excellent For Both Smooth and Rough Surfaces
  6. Eliminates Tile Replacement

DESCRIPTION:

Durable white clay-based coating that covers unsightly ceiling tile stains caused by water damage, smoke, and soil discoloration. Unlike paint, this special restorer does not change the acoustical properties of the ceiling tile. Effective on both smooth and rough tile surfaces. Includes special vertical application actuators that enables you to spray without removing tile, spray around A/C vents, sprinkler heads or in corners. For use in office buildings, schools, hospitals, nursing homes, and apartment buildings.

For Use by: Office building maintenance crews, construction companies, building superintendents, municipalities, restaurants, schools, hospitals, nursing homes, hotels, motels, retail stores.

DIRECTIONS:

Surface Preparation: Remove loose dust and dirt by wiping tile gently with a dry rag or duster. Cover surfaces under area to be treated with newspaper or a drop cloth. Protect other areas with masking tape. Tile must be dry. Leaks which have caused water stains must be repaired prior to application.

. Shake vigorously before and during use.

. Replace button with large vertical action actuator for application on installed tile. When possible, remove tiles to a well-ventilated area before application. Shake can vigorously until agitator ball rattles freely. Continue shaking for at least one minute. Shake vigorously during use. Hold can 8 to 10 inches from tiles to be coated. Apply with a sweeping motion using several thin coats. Allow each coat to dry for at least two minutes before applying next cot. If coating runs, can is too close to surface. Feather edges into the remainder of the ceiling by holding can further away during application.

. Important: After application, clean valve by turning can upside down and applying short burst to clear actuator.

Packaging:

Minimum order 1 case

12 aerosol cans per case

 
 

VST Chemical Corp. - P.O. Box 510 - Yulan, NY 12792 - Ph: 1-845-557-0596 - Email: chemicals@ecki.com